Pulse welding machine with cutting knife to close bags and foils.
In this type of welder, the heating wire is not heated permanently, but only when compressing the handle. To heat the welding wire heating time with the potentiometer according to the bag thickness. The shutdown is automatic, always after the set interval has elapsed. The welder has a clipping knife that allows the clutter or foil after welding.
The welder is all-metal and intended only for small operations (welding capacity 20 to 50 bags in a piece, then it is necessary to unplug the welder and let it cool down for about 1 hour). If this procedure is not followed and the welding machine is overloaded, the transformer will burn out and a claim cannot be accepted for this defect.
The sealer is suitable for: Doypack bags and some types of Boxpack bags
Welding machine type: Impulse lever with cutting knife
Weld width: 8 mm
Maximum welding foil thickness: 2 x 200 μm
Supply voltage: 230 V / 50 Hz
Heating length and power: 200 mm / 300 W
300 mm / 450 W
400 mm / 600 W